Omron ZX Series User Manual

T (Threshold) Mode Section 4-4
121
The threshold value will be set after the
display flashes twice and then lights
continuously.
The threshold value will not be changed while the display is flash-
ing. The measurement process is continued using the previous
threshold value.
POINT
The threshold value will not be changed if a teaching error occurs.
POINT

Omron ZX Series Specifications

General

Power Supply Voltage	12 to 24 VDC ±10%
Protection Rating	IP67
Output Type	NPN or PNP
Protection Circuit	Reverse polarity protection, short-circuit protection
Operating Temperature	-25 to 55°C (-13 to 131°F)