Omron ZX Series User Manual

FUN (Function) Mode Section 4-5
128
The setting operation will be canceled and the previous set value will be
displayed if the LEFT Key is pressed at the leftmost digit or the RIGHT Key
is pressed at the rightmost digit when setting a numeric value (flashing).
The setting is canceled
and reset to the previ-
ous set value.
The display will stop
flashing.

Omron ZX Series Specifications

General

Power Supply Voltage	12 to 24 VDC ±10%
Protection Rating	IP67
Output Type	NPN or PNP
Protection Circuit	Reverse polarity protection, short-circuit protection
Operating Temperature	-25 to 55°C (-13 to 131°F)