Omron ZX Series User Manual

Procedures for Reflective Sensor Heads Section 2-3
23
l Detecting minute changes:
Special Functions (Fun)
3-5-10 Differentiation Function
l Reversing display order:
Special Functions (disp)
3-5-11 Display Reverse Function
l Minimizing the current consumption of the Amplifier Unit:
Special Functions (disp)
3-5-12 ECO Display Function
l Changing the number of digits on the display:
Special Functions (disp)
3-5-13 Limiting the Number of Display Digits
l Setting status when not measuring:
Special Functions (Etc)
3-5-14 Setting for Non-measurement
l Setting workpiece measurement to zero every time:
Special Functions (Etc)
3-5-15 Zero Reset Memory Function
l Setting reception sensitivity (automatic switching or fixed):
Special Functions (Etc)
3-5-16 Gain Switch

Omron ZX Series Specifications

General

Power Supply Voltage	12 to 24 VDC ±10%
Protection Rating	IP67
Output Type	NPN or PNP
Protection Circuit	Reverse polarity protection, short-circuit protection
Operating Temperature	-25 to 55°C (-13 to 131°F)