Omron ZX Series User Manual

Reflective Sensor Heads: FUN Mode Functions Section 3-5
53
n Normal Mode (Hold Not Enabled)
In Normal Mode, the measured value is always displayed and output. The
timing input is disabled and no hold function will operate.
Current (mA)
20
4
Always outputs the measured value.
Measured value
Time
= Display value
= Output value

Omron ZX Series Specifications

General

Power Supply Voltage	12 to 24 VDC ±10%
Protection Rating	IP67
Output Type	NPN or PNP
Protection Circuit	Reverse polarity protection, short-circuit protection
Operating Temperature	-25 to 55°C (-13 to 131°F)