Destination drives with no recognized filesystems are grayed out, with a
warning message stating no filesystem is available. Such a drive can be
formatted through the media utilities available on the drive details screen, which
can be accessed by tapping the additional options menu (three vertical dots) at
the right side of the drive tile, or from the Destinations button on the Home
screen.
Network shares can also be used as logical image job destinations. To make a
network share visible in the Select destinations list, tap the orange plus button
at the top right of the modal and follow the share mounting workflow.
Destination network shares can be mounted from the Destinations button on the
main screen as well.
8. To change the job settings, tap the 5 or Settings heading.
Chapter 4 Using TX1
126
OpenText™ Tableau™ Forensic TX1 Imager
ISTX240300-UGD-EN-1
To Next Page
Loading...
