menu (three vertical dots at the right side of the drive tile) or from the
Destinations button on the Home screen.
To make a network share visible in the Source or Destination selection lists in a
job setup screen, first add and mount the share from the Sources or Destinations
buttons on the Main screen.
6. To change the common settings, tap the 4 or Common Settings heading.
Select up to two hash types of MD5, SHA-1, and SHA-256. Some hash types will
be disabled for certain image file formats, as described in the table below.
Duplication/ Image Type Hash Type Options Notes
DD/DMG/Clone MD5, SHA-1, SHA-256 Can pick any two hash
types. Limited to two to
minimize chances of
inadvertent performance
degradation.
Chapter 4 Using TX1
82
OpenText™ Tableau™ Forensic TX1 Imager
ISTX240300-UGD-EN-1
To Next Page
Loading...
