INF-14
9-1. Service Menu Screen.
[ SERVICE ADJ 1/2 MENU SCREEN ]
< SERVICE ADJ 1/2 >
GAMMA(SERV) : ON
R GAMMA(SERV) : +00
B GAMMA(SERV) : +00
TEST PULSE : OFF
ECU CONNECT : ECU
CONCEAL : ON
INNER ECC : ON
OUTER ECC : ON
IF ADJ : OFF
SERVO MODE : ATF
This menu is use for setting.
ITEM RANGE PRESET REMARKS
GAMMA (SERV) ON/OFF ON
This selects ON or OFF for the GAMMA
correction.
R GAMMA (SERV) -10 - +10 +00 Adjustment of Rch GAMMA for service.
B GAMMA (SERV) -10 - +10 +00 Adjustment of Bch GAMMA for service.
TEST PULSE ON/OFF OFF TEST PULSE becomes available.
ECU CONNECT ECU/EVR ECU
Select the using of the ECU connector
ECU : Connect with ECU
EVR : Connect with EVR tool.
CONCEAL ON/OFF ON
INNER ECC ON/OFF ON
OUTER ECC ON/OFF ON
IF ADJ ON/OFF OFF Turn ON when adjusting Video I/F board.
SERVO MODE ATF/CTL ATF
Selection of SERVO MODE.
ATF : Capstan servo is controlled by ATF
CTL : Capstan servo is controlled by CTL
To Next Page
Loading...
