INF-25
9-4. Special Menu Screen
[ SPECIAL MENU SCREEN ]
< MASTER GAIN >
LOW GAIN : 0dB
MID GAIN : 9dB
HIGH GAIN : 18dB
< BATTERY >
SELECT : Nicd12
< COLOR BAR >
SELECT : SMPTE
< REC SIGNAL >
SELECT : CAM
ITEM RANGE PRESET REMARKS
< MASTER GAIN >
LOW GAIN
-3dB
∼
30dB 0dB
MID GAIN
-3dB
∼
30dB 9dB
HIGH GAIN
-3dB
∼
30dB 18dB
This Selects the following gain for LOW/MID/HIGH
position.
"-3, 0, 3, 6, 9, 12, 15, 18, 21, 24, 30dB"
< BATTERY >
SELECT
Nicd12
Nicd13
Nicd14
IDX L40
L-60
L-90
ANTON_D
IDX_D
Nicd12
This selects the battery type.
NiCd12:
When a +12V NiCd battery is used.
NiCd13:
When a +13V NiCd battery is used.
NiCd14:
When a +14V NiCd battery is used.
IDXL-40:
When the L-40 battery madeby IDX is used
L-60/L-90:
When a battery made bySony is used
ANTON-D:
When a battery made byAnton Bauer is used
IDX-D:
When a battery made by IDXis used digitally
< COLOR BAR >
SELECT
SMPTE/SNG SMPTE
This selects the Color bar signal type.
SMPTE : SMPTE Color bar
SNG : SNG(SPLIT) Color bar
< REC SIGNAL >
SELECT
CAM/VIDEO CAM
This selects the video-input signals.
CAM:
Signals input from the camera.
VIDEO:
Signals input from the GENLOCK IN connector.
* Even when VIDEO has been selected as the REC.SIGNAL item
setting, the setting will revert to CAM when the power is turned
off and then turned back on.
To Next Page
Loading...
