Panasonic AJ-D610WBP - Error Rate Display and Confirmation Method; Error Rate Display Method

INF-28
13. Error Rate Display and Confirmation Method
13-1. Error Rate Display Method
1. Press the
“SHIFT/ITEM” “+” “-”
and
“PAGE”
buttons of the MENU/Time Code Operation Button (in the door
of the right side panel) simultaneously and set the MENU switch to
“SET”
, and then MENU screen is
displayed.
2. Press the
“PAGE”
button a few times until DESIGN MENU screen is displayed.
3. Confirm “
BER SPEED
” setting is “
SLOW
”.
4. Select "
BER ADJ
" by
“SHIFT/ITEM”
button, and select the head
BER ADJ item :
OFF / Lch / Rch
5. The Error rate will be displayed in the Audio meter on the Audio LCD panel.
-
∞
∞∞
∞
-
- 40 -
dB
- 30 -
- 20 -
- 10 -
- 0 -
AUDIO LCD METER
Error rate Spec. ”
A
”
CH1 CH2
L1
R1
L2
R2
L3
R4
L3
R4