Panasonic AJ-D610WBP - Removal of Cylinder Unit; Removal of Cassette up Unit

DIS-3
1-5. Removal of Cylinder Unit
1. Remove the Right Side Panel.
2. Remove the Mechanical Chassis Unit
3. Lift up the flexible cable for remove the 3 screws as
shown as below figure. Disconnect the connector
(A) and the 3 screws (A).
4. Remove the 2 screws and remove the T1 Guide.
Remove the screw (B) and the Cylinder unit with
care not to scratch the cable (A).
1-6. Removal of Cassette Up Unit
1. Remove the Cassette Cover.
2. Remove the Left Side Panel.
3. Loosen the 4 screws (A) and remove the panel.
Screws (A)
Connector (A)
Screws (C)
Screws (A)
Cable (A)
Screw (B)
Screws (D)