ELE-16
3-10. Camera SYNC Level
Adjustment
BOARD
ENCODER
TP
CAM OUT
ADJUST
VR200 [ENC_SYNC_LVL]
MODE
CAMERA BAR
M. EQ.
WFM
SPEC.
NTSC A = 286mV +/- 6mV
PAL A = 300mV +/- 6mV
1. Connect
CAMERA OUT
to a Waveform Monitor
and adjust
VR200
so that the level
A
is in the
specification.
<NTSC>
<PAL>
3-11. Camera Vector Adjustment
BOARD
ENCODER
TP
CAM OUT
ADJUST
VR201[C_LVE] , VC200[QUAD]
VR205[PR_LEV]
VR210[PB_LEV]
F.NUMBER
-
MODE
CAMERA BAR
M. EQ.
Vector Scope
SPEC.
Each color in inner box
1. Set
VR201
at mechanical center position.
2. Connect a Vector scope to the
CAM OUT
and
adjust
VR205, VR210
and
VC200
so that the
center of the Vector is located at center of Vector
scope and each color is in the inner box.
<NTSC>
<PAL>
<Note>
Adjust
VR210
for YL-B direction and adjust
VR205
for
R-Cy, and adjust
VC200
for inner box position.
Adjust each variable adjustment alternately to get the
best result.
A
VR205
VR210
VR205
VR210
To Next Page
Loading...
