INF-24
[ OPTION MENU 2 SCREEN ]
< OPTION MENU 2>
26P CTL DEFAULT : NORMAL
ADDITIONAL MENU : OFF
SHD, ABB SW CTRL : OFF
CAMERA ADP. : TRIAX
ITEM RANGE PRESET REMARKS
26P CTL DEFAULT
NORMAL/
SPECIAL
NORMAL
Select the portable VTR that is connected to 26P
connector.
When set the 26P CONTROL (in VTR FUNCTION
Menu) to OFF, START/STOP terminal in the 26P
connector is set to the following.
NORMAL : LOW (AJ-D92, etc)
SPECIAL : HIGH (AG-7400)
ADDITIONAL MENU ON/OFF OFF
When set to ON, MDR menu is added
MDR Menu
1. Change display of SAFTY MARKER
2. Added item in SPECIAL MENU
(HUMID OPE, TCG VF DISP, SHOCKLES AWB,
TRANSITION)
3. ENG SECURITY is OFF
(Turn the power to ON after install the formatted
setup card. It can use the setup card even it is
formatted other VTR.)
SHD, ABB SW CTRL ON/OFF OFF
Select ABB switch control.
ON : The black shading is executed when press
and keep the ABB SW approx. 5sec.
OFF : Only ABB is executed
CAMERA ADP. TRIAX/4ch TRIAX
Select the Camera Adapter
TRIAX : When connect the Digital Triax system
4ch : When connect the Audio 4ch adapter
To Next Page
Loading...
