INF-16
[ DEFECT COMPENSATION MENU SCREEN ]
< DEFECT COMPENSATION >
DEFECT ADJ MODE : OFF
DEFECT NO. : 00
CURSORS ADJ
V (+/- SW) 0000
H (FF/REW SW) 0000
FIELD CONT : A
DUAL PIXEL : OFF
COMPENSATION : ON
DATA CLR
This menu is use for blemish compensation.
ITEM RANGE PRESET REMARKS
DEFECT ADJ MODE ON/OFF OFF
ON for Defect Compensation adjustment.
<Note>
This mode goes to OFF automatically
when MENU is closed or Page is
changed
DEFECT NO. 00 - 15 00
Select of compensation No.
<Note>
This mode goes to OFF automatically
when MENU is closed or Page is
changed
CURSORS ADJ ------ ------
Cursor can be moved by the following
way.
Horizontal direction :+/- SW
Vertical direction : FF/REW SW
H (+/- SW) 0000 - ------
Horizontal position address of cursor.
V (FF/REW SW) 0000 - ------
Vertical position address of cursor.
FIELD CONT A/B A
Field mode of Defect Compensation.
(Not working)
DUAL PIXEL ON/OFF OFF
Select the Dual pixel compensation
ON/OFF.
CONPENSATION ON/OFF ON
Select the Compensation ON/OFF.
DATA CLR ------ ------
All defect compensation data is reset to
original data, when this item is selected
and + button is pressed with DEFECT
ADJ MODE OFF
To Next Page
Loading...
