ー 164 ー
Advance check sheetIntelligent Controller web settings
7
Would you like to use the function to send an email when an alarm occurs?
□ Yes
⇒
Go to
3
□ No
⇒
Go to
8
8
Do you want the NTP server to automatically adjust the current time?
□ Yes
⇒
Go to
9
□ No
⇒
End of advance check sheet Thank you very much for your cooperation.
9
Please fill in the following details.
NTP server address
[
.
.
.
]
End of advance check sheet Thank you very much for your cooperation.
3. Confirm email sending function
The Intelligent Controller also has an email sending function when generating/cancelling an alarm, but in order to
use this function, the following environment is required.
□ Email transmission protocol: SMTP (Exchange Server not supported)
If checked OK, go to
1
.
1
Have you signed the contract for the e-mail server connection?
□ Yes
⇒
Please fill in the following details.
Outgoing server address for email (SMTP)
[
.
.
.
]
SenderAccount name
[
]
Destination account name 1
[
]
Destination account name 2
[
]
Destination account name 3
[
]
Destination account name 4
[
]
Destination account name 5
[
]
Destination account name 6
[
]
Destination account name 7
[
]
Destination account name 8
[
]
END Thank you very much.
TGR-318_ENG.indb 164 2017/04/06 10:44:46
To Next Page
Loading...
