Panasonic CZ-CFUNC2 Technical Data

ー 177 ー
Settings (Other miscellaneous settings)
Sub menu Screen menu Overview
Operating
Instructions
page
★
Calendr sttgs for distr calc Set specied days, cutoff days, and target time slots
(regular hour ranges) of each day of the week for
distribution calculation.
148 (120)
☆
I/D unit settings Set I/D unit address, afliated group, and so on. 141 (116)
☆
O/D unit settings Set O/D unit (address, etc.). 145 (118)
★
Schedule group name
settings
Edit the name of the schedule group. 151 (121)
★
Area group name settings Edit the name of the area group. 153 (124)
★
Distribution group settings Edit the name of the distribution group. 155 (123)
☆
Pulse meter settings Make allocations between pulse meters and
distribution groups.
158 (125)
★
Distribution mode settings Set the mode used for distributing when calculating
Distribution Ratio.
160 (126)
★
Distribution Ratio settings Set the electricity cost and gas price rates. 161 (126)
★
Event control Perform linked control by setting input and output
conditions for devices.
162 (127)
☆
Network settings Make settings to enable remote controller over a
network.
123 (107)
☆
Email settings Congure the outgoing email server. 168 (130)
☆
User settings Register users that can access the unit over a
network.
125 (108)
☆
Communication adaptor setting Register the communication adaptor connected to
this unit.
170 (131)
☆
Check conguration
*
Modify the registered conguration when there have
been changes to the conguration of the system.
200 (146)
★
Backup Save data (settings, accumulation/distribution, logs)
to USB memory devices.
130 (111)
★
Restore Restore data that has been backed up in the unit or
to a USB memory device.
132 (112)
★
CSV Output Export (output) the settings for this unit in CSV
format.
134 (113)
★
CSV Input Import (input) the settings for this unit in CSV format. 136 (114)
★
Auto-save CSV le Saves the CSV les (distributions, logs)
automatically generated in this unit.
138 (115)
★
Display/Volume settings
*
Adjust the brightness of the unit’s screen and the
sound of the buzzer.
173 (132)
★
Show service contact info. Register the contacts for servicing (telephone
numbers) for this unit.
174 (133)
★
Software update
*
Update the software for this unit. 175 (133)
☆
Initialize
*
Initialise the settings for this unit.
All data will be lost when you initialise.
Do not initialise under any circumstances.
176 (134)
★
Date setting Manually set the date and time. 178 (135)
Open source license The licences for the free software is displayed.
ー
☆
Test run Perform a test operation of the indoor unit after
installing this unit.
181 (136)
☆
A/C communication settings Make settings such as the communications protocol
between this unit and the air conditioning units.
184 (138)
★
Maintenance information Register the units that will require maintenance. 186 (139)
Screen menus marked with
★☆
require you to enter the admin number (password) when you select them.
* These settings are not available for setting or operation over the network.
* The numbers in parentheses indicate page number of this Technical Data.
TGR-318_ENG.indb 177 2017/04/06 10:44:52

Panasonic CZ-CFUNC2 Specifications

General

Brand	Panasonic
Model	CZ-CFUNC2
Category	Controller
Language	English