Panasonic CZ-CFUNC2 Technical Data

ー 15 ー
Display and settings for the communication adaptor board Various procedures
2. Display immediately after power on
•
Immediately after turning on the power of the communication adaptor, all the segments light for 3 seconds,
then the microcomputer software version is displayed for 3 seconds, then the normal display is displayed.
Power on
Indication that air conditioner information is being collected is displayed.
(All segments lit: 3 seconds)
(Microcomputer software version display:
3 seconds)
Indication for air conditioner configuration
3. Air conditioner information collection in progress indication
(SCAN blinking)
Air conditioner link number (X = 00 to 14)
•
In the following case, indication that air conditioner information is being collected is displayed.
1
When collecting information from the air conditioner immediately after turning on the power.
2
When checking configuration
TGR-318_ENG.indb 15 2017/04/06 10:42:42

Panasonic CZ-CFUNC2 Specifications

General

Brand	Panasonic
Model	CZ-CFUNC2
Category	Controller
Language	English