Panasonic CZ-CFUNC2 - Page 171

ー 169 ー
Web settingIntelligent Controller web settings
[2] Connecting to an existing network using a  xed IP address (without using a DHCP server)
About connection
□ Connect the Intelligent Controller to the existing network.
Hub, etc.
Required items: □ LAN cable (arrange locally)
Please obtain the following information from the client (network administrator, etc.).
1
Does the client use a DHCP server for its network environment?
□ Yes
⇒
Go to [2] Connecting to an existing network (2)
□ No
⇒
Go to
2
2
Obtain the IP address to be set for the Intelligent Controller.
IP address obtained for Intelligent Controller
3
Obtain the net mask value to be set for the Intelligent Controller.
Subnet mask obtained for Intelligent Controller
About settings for the Intelligent Controller
Select [System Settings] under [Settings], and display [Network Settings].
TGR-318_ENG.indb 169 2017/04/06 10:44:48