ー 70 ー
Operating Instructions Intelligent Controller
48
Setting a schedule
Operation/Status
Changing the settings in setting cells
1
Select the setting cell to be changed
(1-1) in the “Detail setting” dialogue and
touch [Setting] (1-2).
z The “Sttg” dialogue is displayed.
1-
1
1-
2
2
Change the settings.
z Refer to step 6 on P.44 for the settings.
3
Touch [Register].
z The settings are registered and the “Sttg” dialogue closes.
z To cancel the settings, touch [Cancel].
3
Setting a schedule
Deleting the settings in setting cells
1
Select the setting cell to be deleted in
the “Detail setting” dialogue.
1
2
Touch [Delete].
z The selected setting cell is deleted.
2
49
Setting a schedule
Operation/Status
Allocating a schedule to a calendar
Allocate daily running modes to a calendar.
Calendars can be set starting with the current month and up to 2 years in the future.
4
Select the daily running mode.
4
5
Touch the date.
z The daily running mode is allocated to the selected date.
z While a daily running mode is selected, you can allocate it
to other dates.
z Repeat steps 4 and 5 to allocated daily running modes to
other dates.
5
6
Touch [Register].
z The setting is registered.
z To cancel the settings, touch [Cancel].
6
1
Touch [Set schedule] in “Oper./Status”.
1
2
Touch [Calendar].
z The “Calendar” screen is displayed.
2
3
Use to select the year and month.
3
TGR-318_ENG.indb 70 2017/04/06 10:43:08
To Next Page
Loading...
