355
SEP 2006
Ver. 1.0
DP-8020E/8020P/8016P
(6) Remove the Toner Bottle.
Caution:
Do Not install the Toner Bottle before installing
the Process Unit first. If the Toner Bottle is installed
and turned to the "Locked" position without the
Process Unit, the Toner will spill inside the
machine.
(7) Remove 1 Screw.
(8) Remove the Connector Cover.
(9) Loosen 1 Screw.
(10) Disconnect the Harness.
(11) Remove the Process Unit.
Caution:
To prevent damage to the Process Unit, ensure
that the Left Cover is still open before removing
the Process Unit out of the machine.
Caution:
Exercise caution not to scratch the surface of the
OPC Drum (Green), and not to touch it with bare
hands.
Caution:
The OPC Drum is sensitive to light. To prevent
optical exposure problems, do not expose the
OPC Drum to direct sunlight, or bright light.
Even if it is a fluorescent lamp, approx.1000 lm/m
2
(1000 lx).
To Next Page
Loading...
