358
SEP 2006
Ver. 1.0
DP-8020E/8020P/8016P
(27) Connect one end of the HD Harness to the HDD.
See Note below.
(28) Secure the HD Harness and DC12 Harness
with the Harness Clamps.
Note:
Make sure that the HD Harness is connected to
the HDD correctly as illustrated.
1. The Key on the connector must be facing
Upwards.
2. Either connector of the HD Harness will fit into
the HDD. However, the correct one is shown in
the illustration (Harness comes out from the top
of the connector).
(29) Install the HDD Cover.
(30) Secure the HDD Cover with 4 Screws.
(31) Reinstall the Right Bracket Assembly.
(32) Install 1 Harness Clamp (Medium).
HDD
Correct
Incorrect
HDD
Key
Key
To Next Page
Loading...
