357
SEP 2006
Ver. 1.0
DP-8020E/8020P/8016P
(20) Secure the HDD with 4 Screws (6-32x3/8).
Note:
When securing the HDD, place it at the edge of a
table as illustrated (cover the table to protect it
from scratches).
(21) Install the DC PC Board.
(22) Secure the DC PC Board with 2 Screws.
(23) Install 2 Harness Clamps (Small) and 3
Harness Clamps (Medium).
(24) Connect the HDD2 Harness to the HDD.
(25) Connect the HDD2 Harness to CN143, and
DC12 Harness to CN141 & CN142.
(26) Secure the HDD2 Harness with the 2 Harness
Clamps.
To Next Page
Loading...
