396
SEP 2006
Ver. 1.0
DP-8020E/8020P/8016P
(54) Install the Heater Assembly.
(55) Secure the Heater Assembly with 1 Screw.
(56) Connect the PTC-AC Harness 3 to the Heater
Assembly.
(57) Secure the PTC-AC Harness 3 with 3 Harness
Clamps.
(58) Secure the PTC-AC Harness 3 with the Harness
Clamp.
Caution:
Do not remove the Dummy Plug, if the
Dehumidifier Heater Kit is not installed in the
Paper Tray.
(59) Slide the Scanner Unit.
(60) Mount the Dehumidifier Heater onto the
Dehumidifier Heater Bracket.
To Next Page
Loading...
