398
SEP 2006
Ver. 1.0
DP-8020E/8020P/8016P
(70) Install the Clamp (DZJK000046).
(71) Secure the PTC-AC Harness 1 with the Harness
Bracket and Harness Clamp.
(72) Secure the Harness Bracket with 1 Screw.
Caution:
Trim the excess length of the PTC-AC Harness 1
on the Panel Side.
(73) Remove 8 Screws.
(74) Remove the CCD Cover.
(75) Install the Clamp (DZJK000045).
(76) Install the Dehumidifier Heater Assembly.
(77) Secure the Dehumidifier Heater Assembly with
1 Screw.
(78) Secure the Dehumidifier Heater Assembly with
the Harness Clamp.
(79) Connect the PTC-AC Harness 1 to the
Dehumidifier Heater Assembly.
(80) Route the PTC-AC Harness 2 through the hole
in the frame as illustrated.
To Next Page
Loading...
