406
SEP 2006
Ver. 1.0
DP-8020E/8020P/8016P
(49) Remove the Dummy Plug.
(50) Install 1 Edge Saddle.
(51) Route the PTC-AC Harness 4 through the hole
in the frame as illustrated.
(52) Connect the PTC-AC Harness 4.
(53) Secure the PTC-AC Harness 4 with the Harness
Clamp and Edge Saddle.
(54) Place the machine onto the 2nd Paper Tray
Unit.
Caution:
The machine weights approximately 93.26 - 98.33
lb (42.3 - 44.6 kg). To prevent injuries, use the
appropriate number of personnel and the proper
equipment to lift or move the machine.
(55) Secure the machine with 5 Screws
(XTW3+6LFJ, XTB3+8GFJ).
(56) Remove 1 Screw.
(57) Remove the Bracket.
To Next Page
Loading...
