414
SEP 2006
Ver. 1.0
DP-8020E/8020P/8016P
(17) Remove the Process Unit.
Caution:
To prevent damage to the Process Unit, ensure
that the Left Cover is still open before removing
the Process Unit out of the machine.
Caution:
Exercise caution not to scratch the surface of the
OPC Drum (Green), and not to touch it with bare
hands.
Caution:
The OPC Drum is sensitive to light. To prevent
optical exposure problems, do not expose the
OPC Drum to direct sunlight or bright light.
Even if it is a fluorescent lamp, approx.1000 lm/m
2
(1000 lx).
(18) Slide the 1st Paper Tray out of the unit.
(19) Remove 2 Screws.
(20) Remove the Front Cover 1.
(21) Remove 4 Silver Screws.
(22) Remove the Right Cover.
(23) Install the Counter Guide.
(24) Secure the Counter Guide with 2 Screws
(XTW3+6LFJ).
To Next Page
Loading...
