Panasonic DP-8020E - Page 416

416
SEP 2006
Ver. 1.0
DP-8020E/8020P/8016P
(30) Install the Protective Tab that was cut Step (28).
(31) Install the Key Counter Base.
Caution:
Route the KEY Harness through the hole on the
Key Counter Base.
(32) Secure the KEy Counter Base with 2 Screws
(XSB4+10FJ).
(33) Insert the Harness Clamp into the pre-drilled
hole in the Key Counter Base (from underneath).
(34) Install the Key Counter.
(35) Secure the Key Counter with 2 Screws
(XTB3+6FFJ-RP).