Panasonic DP-8020E

52
SEP 2006
Ver. 1.0
DP-8020E/8020P/8016P
(10) Remove 2 Bushings (698).
(11) Remove Roller Holder (2026) Assembly.
Note:
When reinstalling, make sure that the Roller
Holder (2026) Assembly is properly placed on the
ADF Unit.
(12) Remove the Paper Feed Shaft Assembly
(2029).
(13) Remove Paper Feed Roller (2001), and D26 D
Gear (2025).
(14) Remove the Pre Feed Roller (2018), Pre Feed
Shaft (2019), and Pre Feed Gear 1, and 2
(2020, and 2021).
(15) Remove 2 Silver Screws (B1).
(16) Lift cover, and release the Latch Hook then
remove the ADF Rear Cover (1701).