1 Getting started
‒ ExportVEC: Plug-in software for Adobe® Illustrator®. It converts graphic data that
is saved as an .ai or .eps file to the special .vec file format used in laser marking
systems.
‒ Font Maker: This exclusive software creates and edits the font data (.fon) used for
the marking process.
• Fonts
At the factory, all included font files are already installed in the laser marking system.
These font files are saved to your PC when you install Laser Marker NAVI smart.
‒ Original 1, Original 2, Original 3, Original 4, Original 5
‒ Original 1, Original 2, and Original 3 with smaller font size
‒ ORG3-L1
‒ DINLIKE1-L1
‒ JIS level 1, JIS level 2
‒ GB 2312 level 1, GB 2312 level 2
‒ User-defined font
‒ 2D code pattern font
‒ OCR1
• Sample files
For all laser marker models, samples of backup files (.lmb), marking files (.lms) and
graphic files (.vec/.dxf) are included on the CD-ROM.
• PDF manuals
Language versions not included on the CD-ROM can be downloaded from local
Panasonic Web sites.
‒ “Laser Safety Guide”
‒ “Setup and Maintenance Guide”
‒ “Serial Communication Command Guide”
‒ “Serial Communication Command Guide: LP-400/V compatible mode”
‒ “Laser Marker NAVI smart Operation Manual”
‒ “Logo Data Editing Software Operation Manual”
‒ “ExportVEC Operation Manual”
‒ “Font Maker Operation Manual”
22 ME-NAVIS2-OP-1
To Next Page
Loading...
Need help?
General
