1 Getting started
1.2 PC requirements
To verify your PC's capacities, open the “Windows Settings” and check your resources under
“System”.
You must have at least Windows 8.1 and 512MB disk space to install Laser Marker NAVI
smart.
• Operating system: Microsoft Windows 10 Pro (32 bit, 64 bit), Microsoft Windows 8.1 Pro
(32 bit, 64 bit)
Operating system versions that are no longer supported by Microsoft are excluded.
• Free disk space: ³512MB
• CD-ROM drive: To install the software on a PC without CD-ROM drive, copy all CD-ROM
data to the PC before installation. Use an external storage media such as a USB flash
drive to copy the data.
• USB 2.0 or 3.0 interface
• LAN (for Ethernet): 10BASE-T or 100BASE-TX
• Bluetooth: Version 2.0/2.1/3.0
Bluetooth wireless technology is available for LP-GS051, LP-GS051-E, LP-GS051-L, LP-
GS051-LE, LP-GS052 and LP-GS052-E.
• PC memory: ³2GB
• CPU: Equivalent to or higher than Intel Core i3
• Screen resolution: ³1366x768 pixels
• Display size: ³10.6"
• Peripherals: Mouse or other pointing device, keyboard or other input device
1.3 CD-ROM contents
The included CD-ROM contains the Laser Marker NAVI smart software, additional software
tools, fonts and sample files, as well as user manuals in several languages.
• PC software tools
‒ Laser Marker NAVI smart: The software is required to configure the laser marking
system and create the marking data (online or offline). You can also use the software
to control and to monitor the marking process (online).
‒ Logo Data Editing: With this software, you can create and edit graphic data (.vec) for
the marking process.
ME-NAVIS2-OP-1 21
To Next Page
Loading...
Need help?
General
