4 Online connection between PC and laser marking system
4.5 Disconnect an online connection
You can disconnect an online connection between the laser marking system and a PC on the
“Startup” screen or alternatively with the “Connection” tool.
Disconnect the laser marking system on the “Startup” screen:
• Go to the “Startup” screen and select “Online”.
• In the “Connection” dialog, select “Disconnect”.
The online connection with the laser marking system is now disconnected.
Disconnect the laser marking system with the “Connection” tool:
• Select the “Connection” tool in the ribbon.
• In the “Connection” dialog, select “Disconnect”.
The online connection with the laser marking system is now disconnected.
44 ME-NAVIS2-OP-1
To Next Page
Loading...
Need help?
General
