5. 4K Photo and Drive Settings
146
Recording Mode:
∫ About [More Settings] (step
2 in P144)
• When using burst recording, if you press and hold the shutter button, recording will be
performed until a specified number of pictures are taken.
The available aperture values vary depending on the lens.
Example: when using the interchangeable lens (H-FS12060)
When the initial position is set to F8.0:
1 first picture, 2 second picture, 3 third picture... 7 seventh picture
∫ About [More Settings] (step
2 in P144)
¢ Not available for burst recording. When using burst recording, if you press and hold the
shutter button, recording will be performed continuously until a specified number of pictures
are taken.
A Focus: closer
B Focus: farther away
1 first picture, 2 second picture... 5 fifth picture...
Aperture Bracket
[Image Count]
[3], [5]: Takes a specified number of pictures with different aperture
values within the range based on the initial aperture value.
[ALL]: Takes pictures using all aperture values.
Focus Bracket
[Step]
Sets the interval between focus positions.
• The distance by which the focus position moves in each step will be
shorter if the initial position is closer to a subject, and conversely if the
initial position is farther from a subject, the distance will be longer.
[Image Count]
¢
Sets the number of pictures to be taken.
[Sequence]
[0/s/r]: Alternately moves the focus position closer and farther away
within the range centerd on the initial position as you take pictures.
[0/r]: Moves the focus position farther away from the initial position as
you take pictures.
[Sequence]: [0/s/r] [Sequence]: [0/r]
• Pictures taken with Focus Bracket are displayed as a set of group pictures.
・・・ ・・・
・・・
To Next Page
Loading...
Need help?
General
