81
3. Recording Modes
Set the mode dial to [ ] or [ ].
• If you set the mode dial to [ ], the last used custom set will be called up.
∫ To change a custom set in [ ] ([Custom Mode] menu)
1 Set the mode dial to [ ].
2 Select the menu.
3 Press 3/4 to select the custom setting you want to use, and then press [MENU/
SET].
• The settings are switched to those settings you selected for the
custom set.
∫ Changing the registered content
Registered contents do not change when the menu setting is changed temporarily with the
mode dial set to [ ] or [ ]. To change the registered settings, overwrite the registered
content using [Cust.Set Mem.] on the [Setup] menu.
Using Custom Mode
> [Custom Mode]
It is also possible to display the selection screen by touching the
Recording Mode icon in recording screen.
MENU
C2-1
C2-1
To Next Page
Loading...
Need help?
General
