3. Recording Modes
74
Determine the exposure by manually setting the aperture value and the shutter speed.
1 Set the mode dial to [ ].
2 Rotate the rear dial to set the shutter speed, and
rotate the front dial to set the aperture value.
A Shutter speed
B Aperture value
C Manual Exposure Assistance
• When using the mechanical shutter or the electronic front curtain, you can set [B] (Bulb)
and then [LC] (Live View Composite) by rotating the rear dial to the left.
For information about Live View Composite recording, refer to page 76.
Optimizing the ISO sensitivity for the shutter speed and aperture value
When the ISO sensitivity is set to [AUTO], it will be adjusted according to the shutter speed
and aperture value.
• Depending on recording conditions, an appropriate exposure may not be set or the ISO
sensitivity may become higher.
Manual Exposure Assistance
When the ISO sensitivity is set to other than [AUTO], Manual Exposure Assistance will be
displayed on the recording screen.
• The Manual Exposure Assistance is an approximation. We recommend checking the pictures
on the playback screen.
Manual Exposure Mode
Available Shutter Speed (Sec.)
When the mechanical shutter is used [B] (Bulb), 60 to 1/4000
When the Electronic Front Curtain is used [B] (Bulb), 60 to 1/2000
When the electronic shutter is used 1 to 1/16000
The exposure is adequate.
Set to faster shutter speed or larger aperture value.
Set to slower shutter speed or smaller aperture value.
• When using a lens having an aperture ring, set the position of the aperture ring to [A] to
activate the front/rear dial settings. At positions other than [A], the ring setting takes priority.
• When the flash is activated, the fastest shutter speed that can be selected is 1/200 of a second. (P162)
To Next Page
Loading...
Need help?
General
