257
10. Using the Wi-Fi/Bluetooth function
Wi-Fi function/Bluetooth function
∫ Before Use
• Set the clock. (P39)
• To use the Wi-Fi function on this unit, a wireless access point or a destination device equipped
with the wireless LAN function is required.
∫ About the WIRELESS connection lamp
• In [Wireless Connection Lamp] in the [Setup] menu, you can set
the lamp so that it will not light/flash. (P230)
∫ About the [Wi-Fi] button
In this owner’s manual, a Fn button to which [Wi-Fi] is assigned is referred to as the [Wi-Fi]
button.
(By default, [Wi-Fi] is assigned to [Fn4] when the camera is in Recording Mode, while it is
assigned to [Fn1] when the camera is in Playback Mode.)
• For information about the Fn button, refer to P60.
Steps for pressing [Wi-Fi] (in Recording Mode)
1 Touch [ ].
2 Touch [ ].
∫ Operations that can be performed by pressing [Wi-Fi]
When the camera is not connected to Wi-Fi, press [Wi-Fi]. The camera will then be
ready to be connected to the smartphone. You can connect the camera directly to
the smartphone. (P262)
• When the camera is ready to be connected, you can press [DISP.] to connect with the same
settings as used previously. This is a convenient and quick way to establish a connection.
(P289)
Lit blue
When the Wi-Fi/Bluetooth function is ON or
connected
Blinking blue
When sending image data by operating the
camera
Fn5
Fn5
Fn4
Fn4
Fn6
Fn6
Fn8
Fn8
Fn7
Fn7
To Next Page
Loading...
Need help?
General
