305
11. Connecting to other devices
∫ Making print settings on the camera
Setting options include the number of printed pictures and their size. Make settings before
selecting [Print start].
• If the printer does not support date printing, the date cannot be printed on the picture.
• Depending on the printer, the date print settings of the printer may take precedence so check if
this is the case.
• Items not supported by the printer are not displayed.
• When you want to print pictures on a paper size or a layout which is not supported by the
camera, set [Paper Size] or [Page Layout] to [{] and then set the paper size or the layout on
the printer.
(For details, refer to the operating instructions of the printer.)
You can use [Text Stamp] in the [Playback] menu to stamp date and time on pictures.
∫ Printing date without using [Text Stamp]
In-store printing:
Only recording date can be printed. Order date printing at a store.
The characters entered using the following menus cannot be printed at a store.
• [Age] and [Name] in [Face Recog.] or [Profile Setup]
• [Location] in [Travel Date]
•[Title Edit]
Printing at home:
When using a printer that supports date printing, you can print recording date and time by
setting [Print with Date] (P305) to [ON].
You can use the software “PHOTOfunSTUDIO” to set the print settings for recording date
and text information.
[Print with Date] [ON]/[OFF]
[Num.of prints] Sets number of pictures (up to 999 pictures).
[Paper Size] Sets the paper size.
[Page Layout]
Sets whether or not to add borders and how many pictures to be
printed on each sheet of paper.
Adding date and text to pictures
To Next Page
Loading...
Need help?
General
