97
4. Focus, Brightness (Exposure) and Color tone Settings
Selecting the AF Mode
Applicable modes:
This allows the focusing method that suits the positions and
number of the subjects to be selected.
1
Press [ ] (2).
2
Press 2/1 to select the AF mode and then
press [MENU/SET].
([Face/Eye
Detection])
The camera automatically detects the faces and
eyes of subjects. The camera adjusts the focus on
the eye that is closer to the camera and the
exposure using the face (when [Metering Mode] is
set to [ ]). (P98)
([Tracking])
The camera keeps adjusting the focus and
exposure automatically to the specified moving
object. (Dynamic Tracking)
(When [Metering Mode] is set to [ ]) (P98)
([49-Area])
Up to 49 AF areas can be focused.
This is effective when a subject is not in the center
of the screen.
, etc.
([Custom Multi])
From among 49 AF areas, you can freely set the
optimum shape of the AF area for the subject. (P99)
([1-Area])
The camera focuses on the subject in the AF area
on the screen.
([Pinpoint])
You can achieve a more precise focus on a point
that is smaller than [Ø].
If you press the shutter button halfway, the screen
that lets you check the focus will be enlarged.
• In Intelligent Auto Mode and Intelligent Auto Plus Mode, you can switch to either [š] or [ ].
To Next Page
Loading...
Need help?
General
