12. Others
318
Message Display
Meanings of main messages displayed on the camera screen, and response methods.
∫ Card
• It is a format that cannot be used with the camera.
Either insert another card, or back up any necessary data before formatting. (P33)
• Use a card compatible with the camera. (P32)
• Unable to access the card. Reinsert the card.
• Insert a different card.
• Failure to read or write data.
Turn off the camera, reinsert the card, and then turn it on again.
• The card may be broken.
• Insert a different card.
• Insufficient SD card write speed for motion picture, 4K photo, or Post-Focus recording.
Use an SD card of a supported Speed Class. (P32)
• If the recording stops even when you are using an SD card that meets the specified Speed
Class rating, the data writing speed of the SD card is getting slow.
We recommend backing up data, and formatting (P33).
• Depending on the type of card, recording may stop part way.
[Memory Card Error]/[Format this card?]
[Memory Card Error]/[This memory card cannot be used]
[Insert SD card again]/[Try another card]
[Read Error]/[Write Error]/[Please check the card]
[Recording was cancelled due to the limitation of the writing speed of the card]
To Next Page
Loading...
Need help?
General
