79
3. Recording Modes
Applicable modes:
When the exposure setting is too bright or too dark, you can use one push AE to achieve a
suitable exposure setting.
1 Set a Fn button to [One Push AE]. (P60)
2 (When exposure is not adequate)
Press Fn button.
• The aperture and shutter speed change to the settings adjusted for the correct exposure.
• In the following cases, suitable exposure cannot be set.
– When the subject is extremely dark and it is not possible to achieve adequate exposure
by changing the aperture value or shutter speed
– When recording using the flash
– In Preview Mode
– When using a lens that includes an aperture ring
One Push AE
How to tell if the exposure is not adequate
• If the aperture values and shutter speed blink red when the shutter button is pressed
halfway.
• If the Manual Exposure Assistance (P74) is anything other than when in Manual
Exposure mode.
Blink red
The exposure is changed to give a
suitable exposure.
800080008000
F
3.53.5
F
3.5
00
-
3
-
3
2
00
989898
To Next Page
Loading...
Need help?
General
