10. Using the Wi-Fi/Bluetooth function
268
You can use the smartphone as a remote control for the shutter.
1 Make a Bluetooth connection to the smartphone. (P260)
2 Operate the smartphone.
Not available in these cases:
• In the following cases, remote recording does not work:
– [Panorama Shot] (Scene Guide Mode)
¢
– When using [Time Lapse Shot]
¢ When [Priority of Remote Device] is set to [ ] ([Smartphone]), you can temporarily switch
to Program AE Mode for remote recording. The camera returns to normal operation after
the remote recording has finished.
[Shutter Remote Control]
Wireless connectivity required:
1 Select [ ].
2 Select [Shutter Remote Control].
3 Take pic tures.
About [B] (Bulb)
You can perform [B] (Bulb) recording by setting the shutter speed to [B]
(Bulb) in Manual Exposure Mode. (Up to 30 minutes)
This function is useful when you take pictures of stars in the night sky or
a night scene, since the shutter can be kept open from start of recording
to end of recording.
Operate the smartphone
1 Press [ ] to start recording (Press and hold [ ])
2 Release your finger from [ ] to end recording
• Slide [ ] in the direction of [LOCK] to record with the shutter button fixed
in the fully pressed condition. (Slide [ ] back in the opposite direction or press the shutter
button of the camera to end recording.)
• If Bluetooth is disconnected during the [B] (Bulb) recording, reconnect Bluetooth and perform
the operation to end recording using the smartphone.
To Next Page
Loading...
Need help?
General
