269
10. Using the Wi-Fi/Bluetooth function
∫ Reducing the time to recover from [Sleep Mode]
Select the smartphone function to be used as a priority function when waking the camera
from [Sleep Mode] with a smartphone.
Preparation:
Set [Bluetooth] and [Remote Wakeup] to [ON]. (P266)
• Refer to [Help] in the “Image App” for more details about the [Shutter Remote Control]
operation of the “Image App”.
• [Shutter Remote Control] is available when the camera on/off switch is set to [ON].
• The live view image of the camera cannot be monitored on the smartphone.
• When the camera turns off after [Sleep Mode] is activated during recording, you can reselect
[Shutter Remote Control] on the smartphone to turn it on again. (The following settings are
required.)
– [Remote Wakeup]: [ON]
– [Auto Transfer]: [OFF]
• The camera cannot be turned on by using [Shutter Remote Control].
> [Setup] > [Bluetooth] > [Returning from Sleep Mode]
[Remote / Transfer
Priority]
Shortens the time required to wake the camera with
[Remote operation] or [Transfer image].
[Shutter Remote Priority]
Shortens the time required to wake the camera with
[Shutter Remote Control].
To Next Page
Loading...
Need help?
General
