9. Menu Guide
244
You can process the pictures taken in RAW format. The processed pictures will be saved
in JPEG format.
1 Select RAW images with 2/1, and then press
[MENU/SET].
2 Press 3/4 to select an item.
• You can set the following items. The settings you used for
the recording are selected when you start setting these
items.
[RAW Processing]
> [Playback] > [RAW Processing]
[White Balance]
Allows you to select a White Balance preset and adjust it. If you
select an item with [ ], you can process the image with the setting
at the time of recording.
[Brightness
correction]
Allows you to correct the brightness within the range between j2EV
and i2EV.
[Photo Style]
Allows you to select a photo style effect.
• You cannot select [V-Log L] for pictures taken with effects other
than [V-Log L].
• The effect for pictures taken with [V-Log L] will be fixed to [V-Log L].
[i.Dynamic] Allows you to select an [i.Dynamic] setting.
[Contrast] Allows you to adjust the contrast.
[Highlight] Allows you to adjust the brightness of bright portions.
[Shadow] Allows you to adjust the brightness of dark portions.
[Saturation]/
[Color Tone]
Allows you to adjust the saturation. (When [Monochrome],
[L.Monochrome] or [L.Monochrome D] is selected in [Photo Style],
you can adjust the color tone.)
[Filter Effect]
Allows you to select a filter effect. (Only when [Monochrome],
[L.Monochrome] or [L.Monochrome D] is selected in [Photo Style].)
[Grain Effect]
You can set the graininess. (Only when [Monochrome],
[L.Monochrome] or [L.Monochrome D] is selected for [Photo Style].)
[Noise Reduction] Allows you to adjust the noise reduction setting.
[i.Resolution] Allows you to select an [i.Resolution] setting.
[Sharpness] Allows you to adjust the resolution effect.
MENU
To Next Page
Loading...
Need help?
General
