243
9. Menu Guide
You can add text (comments) to pictures. After text has been registered, it can be stamped
in prints using [Text Stamp].
1 Select the picture. (P239)
•[’] is displayed for pictures with titles already registered.
2 Enter the text. (P64)
You can clear and replace all information relating to face recognition in selected images.
1 Press 3/4 to select [REPLACE] or [DELETE], and then press [MENU/SET].
2 Press 2/1 to select the picture and then press [MENU/SET].
3 Press 2/1 to select the person and then press [MENU/SET].
4 (When [REPLACE] is selected)
Press 3/4/2/1 to select the person to replace and then press [MENU/SET].
[Title Edit]
> [Playback] > [Title Edit]
• To delete the title, erase all the text in the text input screen.
• You can print out texts (comments) using the software “PHOTOfunSTUDIO”.
• You can set up to 100 pictures at one time with [Multi].
Not available in these cases:
• This function is not available in the following cases:
– Motion pictures
– 4K burst files
– Images recorded with the Post Focus function
– Images recorded with [Quality] set to [ ], [ ] or [ ]
[Face Rec Edit]
> [Playback] > [Face Rec Edit]
• Cleared information regarding the [Face Recog.] cannot be restored.
• The Face Recognition information of pictures in a group has to be edited at once.
(You cannot edit one picture at a time.)
• Editing of group pictures can be performed only on the first picture of each set.
MENU
To Next Page
Loading...
Need help?
General
