9. Menu Guide
242
You can set protection for pictures you do not want to delete by mistake.
Select the picture. (P239)
• [999+] is displayed on the screen, if the total number of protects you set for a group pictures is
more than 1000 pictures.
∫ Canceling all the [Protect] settings
Press 3/4 to select [Cancel], and then press [MENU/SET].
You can set five different rating levels for images to do the following:
• Delete all the pictures not set as ratings.
• Check the JPEG image rating level in the file details display in operating systems such as
Windows 10, Windows 8.1, and Windows 8.
1 Select the picture. (P239)
2 Press 2/1 to set the rating level (1–5), and press [MENU/SET] to set.
• When [Multi] has been selected, repeat steps 1 and 2 for each picture.
(It is not possible to use the same setting for a multiple number of pictures.)
• The number of a group pictures will be displayed, if you set for a group pictures. [999+] is
displayed, if the group pictures is more than 1000 pictures.
∫ Canceling all the [Rating] settings
Press 3/4 to select [Cancel], and then press [MENU/SET].
• [Cancel] cannot be selected when [Playback Mode] is set to [Picture Only] or [Video Only].
[Protect]
> [Playback] > [Protect]
If you set the Write-Protect switch on the card to [LOCK], images will not be
deleted even when protection is not set for them.
• Be aware that the [Protect] setting may not work on other devices.
• Even if you protect pictures on a card, they will be deleted if the card is formatted.
[Rating]
> [Playback] > [Rating]
• [AVCHD] motion pictures can only be set to [¡5].
MENU
MENU
To Next Page
Loading...
Need help?
General
