2. Getting Started/Basic Operations
30
Inserting the Card (Optional)
• Check that this unit is turned off.
1
Slide the card door to open it.
2
Insert the card firmly all the way in until a
clicking sound is heard.
• Check the orientation of the card.
A: Do not touch the connection terminals of the card.
3
Close the card door and slide it firmly in the
direction of the arrow until a clicking sound
is heard.
∫ To re move
Insert until a clicking sound is heard and then pull it
straight out.
• Turn the camera off and wait for the “LUMIX” display on the monitor to clear before removing
the card. (Otherwise, this unit may no longer operate normally and the card itself may be
damaged or the recorded pictures may be lost.)
To Next Page
Loading...
Need help?
General
