2. Getting Started/Basic Operations
60
Fn Buttons
You can register functions to the Fn (Function) buttons.
Different functions can be set for both during recording and playback.
1
Select the menu.
2
Press 3/4 to select the Fn button you want
to assign a function to and then press
[MENU/SET].
3
Press 3/4 to select the function you want to
assign and then press [MENU/SET].
• For details on the functions that can be assigned in [Setting in REC mode], refer to P61.
• For details on the functions that can be assigned in [Setting in PLAY mode], refer to P63.
• To restore the default Fn button settings, select [Restore to Default].
• When not setting a function in the Fn button, select [Off].
∫ Setting function buttons from the on-monitor recording information screen
You can also display the screen in step
2 by touching [Fn] on the on-monitor recording
information screen (P49).
∫ Assigning functions quickly
You can quickly display the screen in step
3 by pressing and holding an Fn button ([Fn1] to
[Fn3], [Fn9] to [Fn11]) for 2 seconds. (This screen, however, may not be displayed
depending on conditions such as the function registered or the screen displayed.)
> [Custom] > [Operation] > [Fn Button Set] >
[Setting in REC mode]/[Setting in PLAY mode]
• Some functions may not be available depending on the mode or the displayed screen.
• Some functions cannot be assigned depending on the Fn button.
MENU
To Next Page
Loading...
Need help?
General
