10. Using the Wi-Fi/Bluetooth function
286
Select a connection method to the wireless access point.
• Except for the first-time connection, the camera will connect to the previously-used wireless
access point.
To change the connection destination, press [DISP.].
• WPS refers to a function that allows you to easily configure the settings related to the
connection and security of wireless LAN devices.
Refer to the operating instructions for the wireless access point for details about how to operate
the WPS function and whether it is supported.
[Via Network]
[WPS (Push-Button)]
Save push button type wireless access point that is compatible with
Wi-Fi Protected Setup™ with a WPS mark.
Press the wireless access point
WPS button until it switches to WPS
mode.
e.g.:
[WPS (PIN code)]
Register a PIN code type wireless access point with a WPS mark
that supports Wi-Fi Protected Setup.
1 Select the wireless access point on the camera.
2 Enter the PIN code displayed on the camera screen
into the wireless access point.
3 Press [MENU/SET] of the camera.
[From List]
Select this option when you are not sure about the WPS
compatibility, or when you want to search for and connect to a
wireless access point. (P287)
To Next Page
Loading...
Need help?
General
