10. Using the Wi-Fi/Bluetooth function
276
Displaying pictures on a TV
You can display pictures on a TV that supports DLNA (DMR).
1
Select the menu.
2
Select [Via Network] or [Direct], and connect. (P285, 286)
3
Select a device you want to connect.
• When the connection is established, the screen is displayed.
4
Take or play back still pictures on this unit.
• Set the menu to terminate the connection.
(You can also terminate the connection by pressing [Wi-Fi].)
> [Setup] > [Wi-Fi] > [Wi-Fi Function] > [New Connection] >
[Playback on TV]
> [Setup] > [Wi-Fi] > [Wi-Fi Function] > [Yes]
• Pictures displayed using the Wi-Fi function cannot be output in 4K resolution. To output them
in 4K resolution, connect the camera and TV with an HDMI micro cable. (P293)
• When a TV is connected to the camera, the TV screen may temporarily return to the status
before the connection. Pictures are displayed again on the TV if you take or play back
pictures.
• The [Effect] and [Sound] settings for slide shows are not applied to the TV.
Not available in these cases:
• Motion pictures and 4K burst files cannot be played back.
• Images displayed on certain screens of the camera (thumbnail display screens, etc.) are not
displayed on the TV.
• When [Auto Transfer] in [Bluetooth] is set to [ON], [Wi-Fi Function] is not available.
To Next Page
Loading...
Need help?
General
