35
2. Getting Started/Basic Operations
Attaching a Lens
• Check that the camera is turned off.
• Change lenses where there is not a lot of dirt or dust. Refer to P331 when dirt or dust gets on
the lens.
1
Turn the lens rear cap A and the body cap B in the direction of the
arrow to detach them.
2
Align the lens fitting marks C and then rotate the lens in the direction
of the arrow until it clicks.
• Do not press the lens release button D when you attach a lens.
• Do not try to attach the lens when holding it at an angle to the camera body as the lens
mount may get scratched.
To Next Page
Loading...
