6. Stabilizer, Zoom and Flash
152
• The Image Stabilizer may produce operational sound or cause vibration during its
operation, but these are not malfunctions.
• It is recommended to disable the Image Stabilizer when using a tripod.
• The stabilizer function may not be effective in the following cases.
– When there is a lot of jitter
– When the zoom magnification is high
– When using the Digital Zoom
– When taking pictures while following a moving subject
– When the shutter speed becomes slower to take pictures indoors or in dark places
• The panning effect in [ ] is more difficult to achieve in the following cases.
– In brightly lit places such as in broad daylight on a summer’s day
– When the shutter speed is faster than 1/100 of a second
– When you move the camera too slowly because the subject is moving slowly
(The background will not become a blur)
– When the camera does not keep up with the subject satisfactorily
Not available in these cases:
• In the following cases, the [Stabilizer] will switch to [ ] (Panning), even if it is set to [ ]
(Normal):
– [Panorama Shot] (Scene Guide Mode)
• In the following cases, the [Stabilizer] will switch to [ ] (Normal), even if it is set to [ ]
(Panning):
– When recording motion pictures
– When recording 4K photos
– When recording with the Post Focus function
• In the following case, the [Stabilizer] will switch from [ ] to [ ] even when a compatible
lens is being used:
– When [High Speed Video] is set
• The 5-Axis Hybrid Image Stabilizer function is not available in the following cases:
– When using the Digital Zoom
– When [High Speed Video] is set
– When [4K Live Cropping] is set
To Next Page
Loading...
Need help?
General
