7. Recording Motion Pictures
178
∫ Setting [Pull Focus]
Set the frames that specify the positions where the [Pull
Focus] starts (first position) and stops (second position).
1 Press 2.
2 Press 3/4/2/1 to move the AF area frame, and
press [MENU/SET]. (First position)
• If you press [DISP.] before pressing [MENU/SET], the frame will return to the center.
3 Repeat step 2. (Second position)
• Press [MENU/SET] to cancel the second frame position setting.
Touch a subject (first position), drag your finger to the desired location (second
position), and release the finger.
• If you touch [ ], the frame settings will be canceled.
Button operation
Touch operation
• A greater effect can be achieved by creating a striking contrast of focus between the
start and end positions, for example by shifting focus from the background to
foreground, or vice versa.
• After setting focus, try to keep the distance between the subject and the camera
constant.
• When the camera fails to set the frame, it returns to the first position.
• When [Pull Focus] is set to [ON]:
– AF Mode will be switched to [ ], a setting specially designed for [Pull Focus].
– During picture taking, AF operates as [Ø] at the first frame position.
• When the [Metering Mode] (P201) is set to [ ], the spot metering target is set at the first
frame.
Not available in these cases:
• This function is not available in the following cases:
–During MF
– When using the Digital Zoom
To Next Page
Loading...
Need help?
General
